Good Distribution Practice: Unterschied zwischen den Versionen

Aus cannabis.gmpvintern.de
Zur Navigation springen Zur Suche springen
 
(2 dazwischenliegende Versionen desselben Benutzers werden nicht angezeigt)
Zeile 10: Zeile 10:
 
83 Cannabis and anything that will be used as an ingredient must be distributed in a manner that maintains their quality.
 
83 Cannabis and anything that will be used as an ingredient must be distributed in a manner that maintains their quality.
 
[https://laws-lois.justice.gc.ca/eng/regulations/SOR-2018-144/page-12.html#docCont (source)]
 
[https://laws-lois.justice.gc.ca/eng/regulations/SOR-2018-144/page-12.html#docCont (source)]
 +
 +
=== Conveyances ===
 +
 +
(1.1) Cannabis and anything that will be used as an ingredient must be distributed using a conveyance that is designed, constructed, maintained and operated in a manner that prevents the contamination of the cannabis or thing that will be used as an ingredient.
 +
 +
[https://laws-lois.justice.gc.ca/eng/regulations/SOR-2018-144/page-12.html#docCont (source)]
 +
 +
===Regulations Europa ===
 +
 +
==== Primary Processing ====
 +
 +
12.1 Primary processing includes washing, cutting before drying, fumigation, freezing, distillation, drying, etc. Where applicable, all of these processes must conform to regional and/or national regulations and should be carried out as soon after harvesting as possible.
 +
 +
12.2 On arrival at the processing facility the harvested medicinal plant/herbal substance has to be promptly unloaded and unpacked. Prior to processing the material should not be exposed directly to the sun, except in cases where there is a specific need, and must be protected from rainfall, insect infestation etc.
 +
 +
12.3 In the case of natural open air drying, the medicinal plant/herbal substance must be spread out in a thin layer. In order to secure adequate air circulation, the drying frames must be located at a sufficient distance from the ground. Drying directly on the ground or under direct exposure to the sunlight should be avoided unless specifically required. Attempts must be made to achieve uniform drying of the medicinal plant/herbal substance and thus avoid mould formation.
 +
 +
12.4 Except in the case of open air drying, the drying conditions such as temperature, duration, air circulation etc must be selected taking into consideration the medicinal plant part such as root, leaf or flower and the nature of its active constituent, such as essential oils. Individual conditions must be recorded in detail.
 +
 +
12.5 All materials must be inspected and where necessary sieved in order to eliminate sub- standard product and foreign bodies. Sieves must be maintained in a clean state and should be serviced regularly.
 +
 +
12.6 Clearly marked waste-bins should be available, emptied daily and cleaned.
 +
[https://www.ema.europa.eu/en/documents/scientific-guideline/guideline-good-agricultural-collection-practice-gacp-starting-materials-herbal-origin_en.pdf (Source)]
 +
 +
==== Packaging ====
 +
 +
13.1 In order to protect the product and to reduce the risk of pest attacks, early packaging is advisable.
 +
 +
13.2 Following processing monitored by in-process controls, the product should be packaged in clean and dry, preferably new sacks, bags or cases. The label must be clear, permanently fixed and made from non-toxic material. Information must conform with regional and/or national labelling regulations.
 +
 +
13.3 Reusable packaging material should be well cleaned and properly dried prior to use. No contamination should occur through reusing of bags.
 +
 +
13.4 Packaging materials must be stored in a clean and dry place that is free of pests and inaccessible to livestock and domestic animals. It must be guaranteed that no contamination of the product occurs by the use of packaging materials, particularly in the case of fibre bags.
 +
 +
[https://www.ema.europa.eu/en/documents/scientific-guideline/guideline-good-agricultural-collection-practice-gacp-starting-materials-herbal-origin_en.pdf (Source)]
 +
 +
==== Storage and Distribution ====
 +
 +
 +
14.1 Packaged dried medicinal plants/herbal substances, including essential oils, should be stored in a dry, well-aerated building, in which daily temperature fluctuations are limited and good aeration is ensured. Fresh products should be stored between 1°C and 5°C while frozen products should be stored below -18°C (or below -20°C for long term storage).
 +
 +
14.2 In the case of bulk transport, it is important to secure dry conditions. Furthermore, in order to reduce the risk of mould formation or fermentation it is advisable to use aerated containers. As a substitute, the use of sufficiently aerated transport vehicles and other aerated facilities is recommended. Essential oil transport must conform with appropriate regulations. Regional and/or national regulations on transport have to be respected.
 +
 +
14.3 Fumigation against pest attack should be carried out only where necessary and must be carried out exclusively by licensed personnel. Only registered chemicals must be used. Any fumigation against pest attack should be reported in the documentation.
 +
 +
14.4 For fumigation of warehouses, only substances permitted by the regional and/or national regulations should be used.
 +
 +
14.5 When frozen storage or saturated steam is used for pest control, the humidity of the material must be controlled after treatment.
 +
 +
[https://www.ema.europa.eu/en/documents/scientific-guideline/guideline-good-agricultural-collection-practice-gacp-starting-materials-herbal-origin_en.pdf (Source)]

Aktuelle Version vom 11. Mai 2021, 14:49 Uhr

Regulations Canada[Bearbeiten]

Storage[Bearbeiten]

82 Cannabis and anything that will be used as an ingredient must be stored under conditions that maintain their quality. (source)

Distribution[Bearbeiten]

83 Cannabis and anything that will be used as an ingredient must be distributed in a manner that maintains their quality. (source)

Conveyances[Bearbeiten]

(1.1) Cannabis and anything that will be used as an ingredient must be distributed using a conveyance that is designed, constructed, maintained and operated in a manner that prevents the contamination of the cannabis or thing that will be used as an ingredient.

(source)

Regulations Europa[Bearbeiten]

Primary Processing[Bearbeiten]

12.1 Primary processing includes washing, cutting before drying, fumigation, freezing, distillation, drying, etc. Where applicable, all of these processes must conform to regional and/or national regulations and should be carried out as soon after harvesting as possible.

12.2 On arrival at the processing facility the harvested medicinal plant/herbal substance has to be promptly unloaded and unpacked. Prior to processing the material should not be exposed directly to the sun, except in cases where there is a specific need, and must be protected from rainfall, insect infestation etc.

12.3 In the case of natural open air drying, the medicinal plant/herbal substance must be spread out in a thin layer. In order to secure adequate air circulation, the drying frames must be located at a sufficient distance from the ground. Drying directly on the ground or under direct exposure to the sunlight should be avoided unless specifically required. Attempts must be made to achieve uniform drying of the medicinal plant/herbal substance and thus avoid mould formation.

12.4 Except in the case of open air drying, the drying conditions such as temperature, duration, air circulation etc must be selected taking into consideration the medicinal plant part such as root, leaf or flower and the nature of its active constituent, such as essential oils. Individual conditions must be recorded in detail.

12.5 All materials must be inspected and where necessary sieved in order to eliminate sub- standard product and foreign bodies. Sieves must be maintained in a clean state and should be serviced regularly.

12.6 Clearly marked waste-bins should be available, emptied daily and cleaned. (Source)

Packaging[Bearbeiten]

13.1 In order to protect the product and to reduce the risk of pest attacks, early packaging is advisable.

13.2 Following processing monitored by in-process controls, the product should be packaged in clean and dry, preferably new sacks, bags or cases. The label must be clear, permanently fixed and made from non-toxic material. Information must conform with regional and/or national labelling regulations.

13.3 Reusable packaging material should be well cleaned and properly dried prior to use. No contamination should occur through reusing of bags.

13.4 Packaging materials must be stored in a clean and dry place that is free of pests and inaccessible to livestock and domestic animals. It must be guaranteed that no contamination of the product occurs by the use of packaging materials, particularly in the case of fibre bags.

(Source)

Storage and Distribution[Bearbeiten]

14.1 Packaged dried medicinal plants/herbal substances, including essential oils, should be stored in a dry, well-aerated building, in which daily temperature fluctuations are limited and good aeration is ensured. Fresh products should be stored between 1°C and 5°C while frozen products should be stored below -18°C (or below -20°C for long term storage).

14.2 In the case of bulk transport, it is important to secure dry conditions. Furthermore, in order to reduce the risk of mould formation or fermentation it is advisable to use aerated containers. As a substitute, the use of sufficiently aerated transport vehicles and other aerated facilities is recommended. Essential oil transport must conform with appropriate regulations. Regional and/or national regulations on transport have to be respected.

14.3 Fumigation against pest attack should be carried out only where necessary and must be carried out exclusively by licensed personnel. Only registered chemicals must be used. Any fumigation against pest attack should be reported in the documentation.

14.4 For fumigation of warehouses, only substances permitted by the regional and/or national regulations should be used.

14.5 When frozen storage or saturated steam is used for pest control, the humidity of the material must be controlled after treatment.

(Source)