Personal and Qualification
Inhaltsverzeichnis
- 1 Regulations Canada
- 1.1 Additional Requirements — Holder of Licence for Processing
- 1.1.1 Quality assurance
- 1.1.2 Competencies and qualifications
- 1.1.3 Temperature and humidity
- 1.1.4 Heating, cooling or humidity-control system
- 1.1.5 Incompatible activities
- 1.1.6 Production of food
- 1.1.7 Separation of cannabis and ingredients from contaminants
- 1.1.8 Ingredients — risk of injury to human health
- 1.1.9 Potable water
- 1.1.10 Steam and ice from potable water
- 1.1.11 No presence of animals
- 1.1.12 Land — risk of contamination
- 1.1.13 Removal and disposal of contaminated materials and waste
- 1.1.14 Frequency and manner
- 1.1.15 Conveyances and equipment
- 1.1.16 Clothing, footwear and protective coverings
- 1.1.17 Identification and analysis of hazards
- 1.1.18 Prevention, elimination and reduction of hazards
- 1.1.19 Preventive control plan
- 1.1.20 Content of preventive control plan
- 1.1.21 Retention period
- 1.1 Additional Requirements — Holder of Licence for Processing
Regulations Canada
Additional Requirements — Holder of Licence for Processing
Quality assurance
88 A holder of a licence for processing must ensure that
(a) every investigation in respect of the matters referred to in paragraphs 19(2)(b) and (c) is conducted under the responsibility of the quality assurance person referred to in section 19;
(b) if necessary following an investigation, the quality assurance person immediately causes measures to be taken to mitigate any risk;
(c) cannabis and anything that will be used as an ingredient are produced, packaged, labelled, distributed, stored, sampled and tested using methods and procedures that, prior to their implementation, have been approved by the quality assurance person;
(d) in the case of a cannabis extract or edible cannabis, the quality assurance person approves the preventive control plan referred to in section 88.94 prior to its implementation; and
(e) every lot or batch of cannabis is approved by the quality assurance person before it is made available for sale.
Competencies and qualifications
88.1 A holder of a licence for processing must ensure that any individual who conducts activities in relation to edible cannabis or anything that will be used as an ingredient in the production of edible cannabis has the competencies and qualifications that are necessary to conduct those activities at the site set out in the licence.
Temperature and humidity
88.2 (1) A holder of a licence for processing must ensure that the temperature and humidity of any building or part of a building where cannabis or anything that will be used as an ingredient is produced, packaged, labelled, stored or tested are maintained at levels that are appropriate for the activity being conducted with the cannabis or thing that will be used as an ingredient.
Heating, cooling or humidity-control system
(2) If the building or part of the building is equipped with a heating, cooling or humidity-control system, the holder of the licence must ensure that the system
(a) if necessary to prevent contamination of the cannabis or thing that will be used as an ingredient, is equipped with instruments to control and indicate the temperature and humidity levels;
(b) is accessible and, if necessary for its cleaning, maintenance or inspection, is capable of being disassembled;
(c) is capable of withstanding repeated cleaning; and
(d) functions in accordance with its intended use.
Incompatible activities
88.3 (1) A holder of a licence for processing must ensure that physical or other effective means are used to separate incompatible activities in order to prevent contamination of cannabis or anything that will be used as an ingredient.
Production of food
(2) A holder of a licence for processing must not produce, package, label or store cannabis at a site set out in the licence if food that is to be sold is also produced, packaged or labelled at that site.
Exception
(3) Despite subsection (2), a holder of a licence for processing may produce, package, label or store cannabis in a building within a site where food that is to be sold is produced, packaged or labelled if the food is not produced, packaged or labelled in the same building.
Separation of cannabis and ingredients from contaminants
88.4 A holder of a licence for processing must ensure that physical or other effective means are used to separate cannabis or anything that will be used as an ingredient from anything that presents a risk of contamination of the cannabis or thing that will be used as an ingredient.
Ingredients — risk of injury to human health
88.5 A holder of a licence for processing must ensure that anything that will be, or was intended to be, used as an ingredient that presents a risk of injury to human health is identified as such and is stored in a designated area within the site.
Potable water
88.6 (1) A holder of a licence for processing must ensure that any water that might come into contact with a cannabis extract, a cannabis topical, edible cannabis or anything that will be used as an ingredient is potable and, if the water is not potable, must ensure that it does not present a risk of contamination of the cannabis extract, cannabis topical, edible cannabis or thing that will be used as an ingredient.
Steam and ice from potable water
(2) A holder of a licence for processing must ensure that any steam or ice that might come into contact with a cannabis extract, a cannabis topical, edible cannabis or anything that will be used as an ingredient is made from water that meets the requirements of subsection (1) and, if the steam or ice does not meet those requirements, must ensure that it does not present a risk of contamination of the cannabis extract, cannabis topical, edible cannabis or thing that will be used as an ingredient.
No presence of animals
88.7 A holder of a licence for processing must ensure that no animal is present in any building or part of a building where cannabis or anything that will be used as an ingredient is produced, packaged, labelled or stored.
Land — risk of contamination
88.8 If any land that forms part of a site set out in a licence for processing, or any land that is located near such a site, presents a risk of contamination of cannabis or anything that will be used as an ingredient, the holder of the licence must take measures to eliminate the risk.
Removal and disposal of contaminated materials and waste
88.9 (1) A holder of a licence for processing must ensure that any building or part of a building where cannabis or anything that will be used as an ingredient is produced, packaged, labelled or stored has means for the removal and disposal of contaminated materials and waste and, if necessary to prevent contamination of the cannabis or thing that will be used as an ingredient, that the building or part of the building is equipped with a drainage, sewage and plumbing system that functions in accordance with its intended use.
Frequency and manner
(2) The holder of the licence must ensure that contaminated materials and waste are removed and disposed of at a frequency that is sufficient to prevent contamination of the cannabis or thing that will be used as an ingredient and in a manner that does not present a risk of contamination of the cannabis or thing that will be used as an ingredient.
Conveyances and equipment
88.91 A holder of a licence for processing must ensure that any conveyance or equipment that is used at the site set out in the licence to handle any contaminated materials or any waste, unless that conveyance or equipment does not come into contact with those materials or waste,
(a) is used only for that purpose;
(b) is identified as being reserved for that purpose; and
(c) meets the applicable requirements of section 86.
Clothing, footwear and protective coverings
88.92 A holder of a licence for processing must ensure that any individual who enters or is in any building or part of a building where cannabis or anything that will be used as an ingredient is produced, packaged, labelled, stored, sampled or tested wears clothing, footwear and protective coverings, including gloves, a hairnet, a beard net and a smock, that are in good condition, clean and in sanitary condition and that are appropriate for the activity being conducted with the cannabis or thing that will be used as an ingredient.
Identification and analysis of hazards
88.93 (1) A holder of a licence for processing that produces a cannabis extract or edible cannabis must identify and analyze the biological, chemical and physical hazards that present a risk of contamination of the cannabis or anything that will be used as an ingredient in the production of the cannabis extract or edible cannabis.
Prevention, elimination and reduction of hazards
(2) The holder of the licence must prevent, eliminate or reduce to an acceptable level the hazards referred to in subsection (1) by using control measures that are shown by evidence to be effective, including any treatment or process.
Preventive control plan
88.94 (1) A holder of a licence for processing that conducts activities in relation to a cannabis extract or edible cannabis must prepare, retain, maintain and implement a written preventive control plan for any activity they conduct in respect of the cannabis or anything that will be used as an ingredient in the production of the cannabis extract or edible cannabis.
Content of preventive control plan
(2) The preventive control plan must include
(a) a description of the measures for ensuring that the applicable requirements of sections 101.3, 101.4, 102, 102.2, 102.3, 102.5 and 102.6 are met;
(b) in relation to the applicable requirements of these Regulations,
(i) a description of the biological, chemical and physical hazards that are identified under subsection 88.93(1) that present a risk of contamination of the cannabis extract, edible cannabis or anything that will be used as an ingredient in the production of the cannabis extract or edible cannabis,
(ii) a description of the control measures for preventing, eliminating or reducing to an acceptable level the hazards referred to in subparagraph (i) and the evidence that the control measures are effective,
(iii) a description of the critical control points, the related control measures and the evidence that the control measures are effective,
(iv) a description of the critical limits for each critical control point,
(v) the procedures for monitoring the critical control points in relation to their critical limits,
(vi) the corrective action procedures for each critical control point,
(vii) the procedures for verifying that the implementation of the preventive control plan results in compliance with these Regulations, and
(viii) documents that substantiate that the preventive control plan has been implemented with respect to subparagraphs (i) to (vii); and
(c) supporting documents that show evidence of the information recorded under paragraph (a) and subparagraphs (b)(i) to (vii).
Retention period
(3) Each document referred to in subparagraph (2)(b)(viii) must be retained for at least two years after the day on which it is prepared.